Mini Bottle Holder Tutorial using Magnolia Mini Yoga Tilda

Good morning and thanks for stopping by today. Earlier on THIS POST, I've mentioned that when I get a chance, I will post the tutorial on the mini bottle holder project. Over the last few weeks, I've received some emails and requests asking about this project. Well, last night I finally prepared the tutorial and have this post today.

This is a pretty simple project to try out. You don't need to use a lot of cardstock or pattern paper, so maybe you can dig out your scrap, lol

Supplies you need:

Cardstock - 8" x 4 1/2" and a purple 1 1/4" circle punch out

Pattern paper - 1 3/4" x 1 1/4" (1 piece), 1 3/4" x 1" (2 pieces), 4 1/2" x 1 1/4" (1 piece) and a 1 3/8" circle punch out

Stamp - Magnolia Mini Yoga Tilda

Other Tools: Scor-Pal, Scor-tape, corner punch, scissors, glue

Take the 8" x 4 1/2" cardstock, with short edge across the top of Scor-Pal, score at:
1/4", 1 1/2", 3", 4 1/4"

Turn the piece 90 degree, with the long edge across the top of Scor-Pal, score at:
2", 3 1/4"

After you score all the lines, please see the picture below: Cut away the shading part. Cut following the 'purple cross' line. You can refer to more pictures below if you are not sure where to cut away.

I use a corner punch to round the left & right corners of the long strip on the cardstock piece. **But this is option, if you don't want any round corners, you don't have to do this step.

Now you can see what I mean on which shading part to remove. (left piece is after the shading is removed and the cut on the "purple cross" line. Then take the three small pieces of pattern paper and adhere them on the cover of the holder as pictures below. **I embossed all the pattern paper before adhere them to the cover, but again this is optional.

Then turn the cardstock piece over and adhere the long piece of pattern paper on the cardstock (see picture below)

Apply Scor-tape on the edges of the cardstock piece (See left). Please refer the "red" area for the edges to apply Scor-tape (See right).

Once you apply the Scor-tape, you can fold and adhere the inside as shown as the picture below

Then fold the outside edges in and adhere the piece as shown on the picture below

That is what it will look like when it's done. You are almost finished.

Loop a piece of ribbon together with glue or a glue dot as shown on picture below. Put the smaller pattern paper circle on the bigger cardstock circle. Adhere the colored Mini Yoga Tilda image on the circle. Adhere the circle on the ribbon.

This is what it will look like when it's done.

Ta-DA, all you do is to put the ribbon loop on the mini Bailey bottle and put the bottle into the holder!!

I hope you are going to have fun trying this out!! Thank you for coming by and see you again soon :o)